How does it work ?

How can I unlock my Motorola?

Home Motorola

Remember: before following these instructions, you should first order your Motorola unlock code.
Once you have received your Motorola unlock code, you can follow these simple instructions:

For most models:

A non-accepted SIM Card is required.

Please insert a non-accepted SIM card so that your phone will ask you for the 8- or 16-digit unlock code.
A non-accepted SIM card is a SIM card that is from a carrier that your phone is NOT locked to. For example, if your phone is CURRENLTY locked to Verizon, insert a SIM card from AT&T, T-Mobile, Sprint, etc to get the unlock code prompt. Enter the unlock code only ONCE.

Note : If one of theses messages appears:

- "Contact Service Provider"
- "Tamper Alert"
- "Wait before entering special code"
- "Contact Service"

It's because someone already entered too many wrong codes. In this case, you just have to leave the phone ON with theses errors messages and after 40 minutes to 2 hours maximum the message "Enter Special Code" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the Phone icon
2 - Enter the following keys: ** 057 *
3 - Your phone will display "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key and dial code : 787090
2 - The phone displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The phone asks you for code
5 - Enter the unlock code.

Model : Motorola 3G

If your phone is on a 3G network enter **057*
Then enter the unlock code into the window

Model : Motorola CDMA & TDMA

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Enter the code you receive
Your phone is now unlocked

Model : Motorola Gleam

Insert the SIM card that you want to unlock your phone with.
The phone will ask you to enter the unlock code.

If the unlock code is incorrectly entered three (3) consecutive times the phone will be blocked and stop asking to enter the unlock code. In this situation you can 3 try to enter #073887* or insert nthe SIM card you want to unlock your phone with and wait 10-30 minutes
or update the phone's firmware and do a wipe data/factory reset.

Model : Motorola MPX

Switch ON your phone with with the SIM card that you want to unlock your phone with.
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
Your phone is now unlocked
If phone is asking for NETWORK PUK
Power on the phone with the original card in and wait until your phone is fully powered on and you have access to the menu
Type * # * * 3 6 4 # and press the green button
You will get an error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []", your phone is unlocked
If you get 1 error, then make sure you have typed the code correctly and try the other code

Switch your phone off, take the battery out. Put battery back in. Power on the phone and leave it for 40 minutes to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password.

If phone is asking for SERVICE PROVIDER PUK

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you.